|
COMPUTER NETWORKING FURNITURE
SPECIFICATIONS
WORKSURFACE
- Work top, high density shipboard,
veneered on both sides with Melamine (0.7 mm). Total
thickness 29.5 mm light gray postforming front edge,
lateral and rear edge with hard PVC edge band.
- Supporting structure, cold
laminated steel profile, 2 mm thick, powder coated, light
gray.
- Crosshead made of cold laminated
steel profile 1.5 mm thick, with aluminum diecast
adapters with integrated suspension hooks.
- Maximum loading capacity of
worksurface: 300 lbs.
DEPOSITING SHELF COMPLETE
- Surface, shipboard, veneered on
both sides with Mel amine (0.7 mm). Total thickness 29.5
mm, light gray, postforming front edge, side and rear
part with hard PVC edge band.
- Maximum loading capacity of
depositing shelf 135 lbs.
SUPPORT LEG
- Cold laminated steel profile, 2 mm
thick with top fitting in Recast, prepared for connection
of auxiliary equipment (support frame, self adaptor and
telephone are etc.), powder coated in light gray, top and
lateral covers for support leg and triangular base cover
made of glass fiber reinforced polyamide, available in
red, blue, black, or light gray.
- Foot made of cast steel, powder
coated in anthracite light gray, with level footing
accessible from above with Allen Keys.
SET OF CABLE MANAGEMENT
- Easily accessible horizontal cable
channel, made of perforated sheet steel with welded steel
reinforcements with spacious pocket to take up multi
sockets, detachable lid made of perforated sheet steel
with plastic profile as edge protection.
- Vertical cable channel
manufactured of hard PVC extrusion profile, as edge
protection, color light gray, flexible lips (soft PVC)
facilitating cable extraction at any place.
- Steel parts powder coated in light
gray, intermediate and end pieces, injection mounded
polypropylene, color light gray, snap-in fitting,
detachable parts for horizontal and vertical cable
guidance.
KEYBOARD TRAY
- Keyboard tray, continuous,
subsequent assembly possible.
- Metal frame, powder coated, with
shipboard insert veneered on both sides with Melamine
(0.7 mm).
- Stable ball telescopic rails with
30 mm over-extension.
- Usable depth 290 mm each.
Movability 330 mm. Built-in Height 125 mm.
- To be used with all worksurfaces
and 400 mm deep depositing shelf.
SUMMARY: STANDARDS
- DIN ISO 9001 / EN29001
- G.S. fully tested for
health/safety - Institute LGA Nurnberg
- The most technically advanced
furniture system on the market today. Based on
interchangeable component parts, making it very easy to
reconfigure layouts as changing needs dictate.
- Versatility and multi-level
application are the key factors.
- Installation made possible with just two Allen Keys and a rubber mallet.
- Worksurfaces and shelves can be
supported on the front and rear of support leg.
- Vertical and horizontal cable
channel for complete cable management.
- Supporting structure, cold
laminated steel profile 1.5 mm thick.
- Worksurface and shelves tested and
approved by the LGA-Test-lnstitute with a test load of
300 Ibs for worksurfaces and 135 Ibs for the
shelves.
- Octagonal pillar allows for
surfaces/deposing shelves to be mounted at various 45
degree angles.
Back to Networking
Furniture
Back
to Intro
|
|