Shortcut to Specifications DOWCRAFT MOVABLE WALLS One of the biggest concerns of providing a quality training facility is privacy. In order to assure maximum training results, removing the possibility of needless interruptions is essential. This requirement must be addressed using some type of wall to provide space division. Whether the task is to divide one large room into several smaller ones or to establish the training facility within any large space, you need to have a fast, flexible, and effective way to provide this division. Corporate Technology has reviewed and recommends DOWCRAFT MOVABLE WALLS as the answer. This is the only solid steel Demountable Partition manufacturer currently on GSA contract. Movable Walls provide the same noise privacy levels (sound transmission coefficency) as a 48² thick concrete block wall. But, as your space allocation needs change, this product can be removed and re-installed over and over again. Without the time and cost of a complete reconstruction.. DOWCRAFT products are available to meet any height requirements and panels are available in any width, to provide any size room desired. Wall surfaces are available in painted steel, vinyl, or fabric. Panel splice locations allow for cable chases from the floor to the ceiling area above. A wide selection of door options and accessories are available to meet any need you may have. The DOWCRAFT MOVABLE WALL can be located on the building floor to provide a perimeter wall around a training room, or it can be mounted on top of the AMP POWERFLOR  to provide interior training room division without loss of cable access from room to room.  Available from our GSA /Multiple Award Contract General Services Administration Federal Supply Services FSC GROUP 71, Part III, Section M Contract # GS-28F-2082D Specifications Back to Intro Contact Us!